Process, Removable, and Splicing Tapes
Working tapes for manufacturing: materials that hold, carry, mask, or join during production and then release cleanly.

What this family covers
Process tapes do their job inside someone else's manufacturing line. They hold a part in position, carry material through a die-cutting step, mask a surface, or join one roll to the next.
What matters is predictable behavior: the right tack on contact, consistent peel, clean release from the liner, and no residue when the tape comes off.
Shawsheen supplies these materials to converters and die cutters in roll form, and adjusts adhesive and backing to match the process.
Suitable applications
- Splicing rolls of film, textile, and other webs
- Seaming textiles and other substrates
- Carrying and positioning parts during die cutting
- Temporary holding and positioning for sewing and assembly
- Light-blocking masking where pinholes cannot be tolerated
Constructions
What we make in this family today, and what we build to order.
| Construction | Description |
|---|---|
| Film splicing tape | Film backing with an adhesive designed for splicing. Self-wound. Developed to replace a discontinued tape and now used by multiple customers and in our own plant. |
| Seam and splice tape | Film with a specialty adhesive for seams and splices in textiles and other substrates. |
| Removable process tapes | Removable adhesive on film or paper for temporary holding and carrying. |
| Pinhole-free tape | Extensible paper backing with removable adhesive and a custom coating that acts as a light barrier. |
| Assembly and positioning tapes | Tapes for positioning and sewing in apparel, sails, flags, and similar products. |
| Double-sided removable tapes | Permanent adhesive on one side and removable on the other, or removable on both. |
Backing and adhesive
- Backings
- Film, paper including extensible paper, and textile.
- Adhesive behavior
- Removable, temporary, or permanent, selected for the surface and dwell time.
- Liner
- Self-wound or linered. Liner release is matched to how the tape is dispensed.
Formats and supply
- Roll formats
- Slit rolls from 1/2 in to 20 in. Larger widths for custom production.
- Coating width
- Up to 63 in after trimming.
- Converting support
- Liner removal, splicing, and rewinding for inspection and put-up of wide and large-diameter rolls.
- Order size and lead time
- Set for each program.
Performance data
Thickness, peel, tack, stretch, and release values depend on the exact construction, so we do not publish generic numbers. When you request technical information, we send data for the construction you are evaluating, with units, test methods, and test conditions.
Request Technical InformationCustomization options
- Tack and peel level matched to your surface
- Removal behavior: clean release after your dwell time and temperature
- Liner type and release level
- Backing thickness and stiffness for die cutting
- Slit width, roll length, and core size
- Color for visual identification
What to tell us about your process
The surface the tape touches, how long it stays on, the temperatures it sees, how it is applied and removed, and whether any residue or transfer is acceptable. If the tape runs through a die-cutting or laminating step, tell us about that equipment too.
Technical documents
Approved data sheets for this family are not yet published online. Request the documents you need and we will send what is available for the construction you are considering.
Related markets, capabilities, and case studies
Request samples or discuss this product
Tell us which construction interests you and how you plan to use it. Your request will note that you started from this page.
Prefer email or phone? SRC_Contact_Us@shawsheencc.com or 978-475-1710


