Industrial and Process Applications
Tapes and coated materials that work inside a manufacturing process, supplied to manufacturers, converters, and die cutters.
Materials that have to run, not just stick
In an industrial process, a tape is judged by how it behaves on the line. It must unwind evenly, apply without wrinkles, hold through the operation, and release when the job is done.
Shawsheen coats and converts materials for those conditions. We supply finished tapes to manufacturers, converters, and die cutters.
We also run our own tapes in our own plant, including the splicing tape we developed when a widely used product was discontinued.
What the application demands
- Tack
- How quickly the adhesive grabs on contact. Higher tack helps automated application. Lower tack allows repositioning.
- Peel
- The force needed to remove the tape. We match peel to the surface and to how the tape is removed.
- Liner release
- How easily the liner separates. Release has to suit your dispensing or die-cutting equipment.
- Residue
- Removable constructions are selected to leave the surface clean after your dwell time and temperature.
- Handling
- Backing stiffness, thickness, and stretch affect how a tape tracks through equipment.
- Converting compatibility
- Roll width, length, core size, and winding are set for your slitters, laminators, and presses.
Materials we supply for this market
| Material | How it is used |
|---|---|
| Film splicing tape | Joining rolls of film and other webs during processing. |
| Seam and splice tape | Seams and splices in textiles and other substrates. |
| Removable process tapes | Temporary holding, carrying, and masking, including materials for die cutting. |
| Pinhole-free tape | Extensible paper tape with a light-barrier coating. |
| Double-sided bonding tapes | Bonding on textile, film, or paper carriers, permanent or removable on either side. |
| Specialty foams | Coated foams for window assembly and other uses. |
| Moisture barriers and underwater seam tape | Multi-layer barrier coatings and seam tape for submerged use in construction and building. |
| Toll coating | Your coating or substrate, run confidentially on our lines. |
For converters and die cutters
If you die cut or convert for your own customers, we supply tapes matched to your process and help solve construction problems.
- Coating up to 63 in wide after trimming.
- Precision slitting of wide rolls, with crush cut and driven cutting.
- Liner removal, splicing, and rewinding for inspection and put-up of wide and large-diameter rolls.
- Die cutting in house and through our supply chain network, from design and validation to commercial production.
Technical information
Tell us which construction you are evaluating and we will send data for it, with units, test methods, and test conditions.
Related products, capabilities, and resources
Discuss a process tape or coated material
Share the application, the material you have in mind, and the format you need. We will reply with next steps, whether that is a sample, a data sheet, or a call with our technical team.
Prefer email or phone? SRC_Contact_Us@shawsheencc.com or 978-475-1710


